New Brembo Parts

10mm copper crush washers, fitting a new caliper ? You really shouldn't re use these especially as they are just 40p each

High Quality M10 x1 Stainless double banjo bolt with 3 crush washers £6.45
 

High Quality M10 x1 Stainlesssingle banjo bolt with 2 crush washers £5.45

Carbon Ceramic pads for PO5 callipers. Genuine Brembo. £21.50 a pair (one calliper) 
CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs. 
If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads. out of stock
 

PO5 Calliper pin sets £9.50

PO5 caliper seal kits £17.75

Hard anodised pistons for Brembo P05 and some Gremeca £27.50 pair

P05 caliper parts

P05 pad covers £6.25  Back in stock 

P08 caliper parts

NEW Carbon Ceramic pads for PO8 callipers. Genuine Brembo. £25.50 a pair (one calliper) 
CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs. 
If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads.
 

NEW EBC organic pads for Shaved Calipers and cast iron discs. 7.5mm thick especially for P08 shaved SS calipers. £24.95 pair (one disc)

New Brembo PO.8 Calliper seal kit £29.00

Brembo hard anodised piston set P08 £29.00

New Brembo PO.8 Calliper pad covers, twin nipple £6.90 

New Brembo PO.8 caliper cover for single nipple £7.20

NEW P0.8 pin kits bright zinc plate £12.75

P09 Pads.
Genuine Brembo P09 pads, Carbon Ceramic   £32.00 pair

Set of 6 stainless cap heads to replace the BZP cap heads used for holding Brembo PO5 calipers together £12.00 set
 

P09 caliper parts

Bleed Nipples

PS15 Parts

PS12 Parts

Brembo PS15 rear master cylinder piston and seal kit. Used in some rod operation Master cylinders with remote reservoirs Benelli, Bimota etc £24.50
Brembo Part No. 10377310

M6 x 1 BZP steel Genuine Brembo bleed nipples with rubber boots, supplied in pairs. £9.30 pair
 

 M7x1 nipples,Stainless steel Underside of hex to tip 18mm
Useful if you have stripped your M6 threads in a P08  £6.25 each

Replacement o-ring for bowl ps15/17 round front master cylinders £2.95

M10 x 1mm Bright Zinc nipples for P08 single nipple calipers , genuine Brembo with brembo caps £ 8.75
18 mm from underside of hex to tip  
 

Genuine Brembo  nipple caps one size fits M6, M8, M10. £1.00 each

Bracket for 15ml reservoir used on the clutch side
916/996 and others
Bracket only £17.50

NEW PS12/13 front and PS15 rear caps with bellows £13.75

PS12 master cylinder kit £23.50

PS15 Front master cylinder bowl kit .Pattern part fully compatible with Brembo parts. £28.95  

 Brembo PS15 front and rear master cylinder piston and seal kit £30.00

15ml remote reservoir with straight outlet common use on rear brake master cylinders with caps and bellows £9.00 each

15ml remote reservoir with angled outlet common use on clutch and rear brake master cylinders with caps and bellows £9.00 each

Bracket for 45ml reservoir used on the brake side
916/996/998/999 and others
Bracket only £17.50

New Brake reservoir, 45ml std equip on Most Guzzi’s, Ducati 900 916 etc Apr RSV1000 etc £19.95 with cap bellows and screws. last one

Bracket for remote reservoir used on the brake side on 748/916 and others
Bracket only £17.50

30ml remote reservoirs single mounting point Great for TT1 or 2 fork top mount £13.50 

New Brake reservoir, 45ml std equip on Most Guzzi’s, Ducati 900 916 etc Apr RSV1000 etc £21.95 with cap bellows and screws. (SMOKE)

Brake pad pin retaining R clips
1mm dia Stainless steel, 17mm overall length £0.95p each

Brake pad pin and clip for single pin 4 pots P4 30/34 calipers £4.75 each

Pin and spring set for Rear P32 F £9.95

Pad spring for single pin 30/34 caliper £7.35 each

Pin and spring set for Rear P32 G £9.95

Rubber mount for  fluid reservoir with screw and nut
£15.50

EPDM hose for remote reservoirs. 5mm bore fits std  7mm Brembo remote fittings
Sold as 15cm length with 2 clips  £3.30 or cut to length. Extra clips   £0.65 each

Brake pad pins and clips for 2 pin 4 pots P4 30/34 calipers £9.95 pair

Rear master cylinder parts

Ducati bevel and Pantah rear master cylinder lever  £24.00

Laverda rear master cylinder lever £24.00

Rear master cylinder bellows for push rod masters with remote reservoirs. £4.95

Bar clamp Gold £12.75

Bar clamp with mirror mount, these come in left hand and right hand thread  for clutch and Brake side. £14.75

Brake pressure switch for Brembo M10 x 1 thread  standard on the front of Laverda and Ducati £14.50

Brake pressure switch for Brembo M10 x 1 thread and a banjo fitting, standard on the rear of Laverda and Ducati £17.50

M10 x 1 Stainless banjo bolt with bleed nipple . If you have trouble bleeding a caliper expecially a twin nipple P08 with a sheared niple then this might help. £19.95

Here we are you lucky customers, paddy has found you PS14 master cylinder kits. If you have a 120 Lav it might well have a PS14 master either front of back, the outer casting is the same as the std PS15 but check the hand stammped numer for 15 or 14

?  £48.00 

Smoked 15ml remote reservoir with angled outlet common use on clutch with caps and bellows, Can be paired with the 45ml smoked brake resevoir above.£14.00 each

Bar clamp commonly used on the Monster clutch side with mirror mount and the small hole to locate the choke assembly, gold only £12.75

Pad pin locator/retainer Brembo some 30/34 calipers £3.75 each

Pivot and nut for the coffin type resevoir levers £11.50

Pad covers for P32B calipers £9.95

PS12 bowl kit for front PS12 and the rear PS15 as used on Laverda and ducati. Consists of Lid, Bellows, bowl and O-ring. £29.95 Easy screw fit 

BREMBO B-QUIET

It has to be applied on the contact surfaces between the pad and the brake caliper (on the bracket if it's a floating caliper). B-QUIET helps the braking system to work properly avoiding any noise from arising and assures an enhanced part protection from corrosion £6.75

Attention! Do not apply the lubricant on the disc or pad braking surfaces. The properties of Brembo B Quiet may alter if mixed with other lubricants. Furthermore, it is not compatible with EPDM plastics that could swell.

PS lid with bellows and screws  part number : 110270443  note these come in variouse sizes. £18.25

Replacement glass , seal, and clip for  clutch and brake master  £7.25 cylinder.

P09 Pston pair  £32.00 pair

P09 Seal kit  £32.00

General Brembo Parts

Discontinued Brembo Parts

All parts below are temporary clearance and half marked price while stocks last, limited quantities 

M6 x 1 BZP steel Genuine Brembo bleed nipples with rubber boots, supplied in pairs. £9.30 pair